7.2v Battery For Rc Cars

7.2 Volt RC Battery, we also call it 7.2V RC Battery. Here we mainly describe in detail the batteries for remote control toys, models, remote control tanks, remote control boats, remote control naval vehicles, remote control motorcycles, DIY models, Airsoft, etc.

6 Tips You must know before using the 7.2V RC Car Battery:
Battery maintenance has always been a problem that everyone is more concerned about. Here we will introduce it in detail.

Battery life refers to the number of charging and discharging before the capacity of charging and discharging drops to 80% of the nominal capacity after a period of use. It does not mean that the battery cannot be charged or discharged or is completely failed.

the self-discharge rate refers to the battery after it is fully charged The phenomenon of slow self-discharge when left unused for a long time. The low self-discharge rate indicates that the capacity drops less after long-term storage.

For outings to shoot programs or news interviews, portable video recording equipment is generally used. The batteries used with portable video recording equipment are a vital part of ensuring efficient and high-quality continuous long-term work to ensure the smooth progress of filming work. The normal function of the battery is closely related to the correct use and careful maintenance of our TV and audio-visual workers in their daily work, so the use and maintenance issues should arouse our attention.

1. In daily work, you should be familiar with the type of battery you use, its basic characteristics, and performance. This is of great significance to guide us in the correct use and maintenance, and it is also extremely important to extend the service life of the battery.

2. When charging, the room temperature should be controlled between 10°C and 30°C. If the temperature is higher than 30°C, it is better to take cooling measures to avoid deformation due to overheating inside the battery; when the room temperature is lower than 5°C, insufficient charging will occur. Affect battery life.

3. After the battery has been used for some time, due to different discharge levels and aging, there are more or less insufficient charging and performance degradation. Generally, nickel-cadmium batteries can be used after about 10 charge and discharge cycles. Recharge. The method is to extend the charging time by about twice the normal charging time.

4. Battery charging and discharging should be operated in strict accordance with the requirements, and avoid long-term overcharge, over-discharge, or frequent undercharge. Incomplete discharge, long-term low-current deep discharge, or short-circuit during battery use are all important factors that cause the decrease of battery capacity and shortened life. In the long run, illegal use and operation will not only affect the use of the battery but will inevitably affect the capacity and life of the battery.

5. In the common charger, the battery charging process should be completed at one time. Do not cut off the power halfway or after the fast charging is over, the battery is in a high-temperature state, and the power is turned on again so that the charger can quickly charge the battery again Charging will result in overcharging. When the battery warning indicator flashes during use, the battery should be replaced in time to avoid excessive battery discharge.

6. Nickel-cadmium batteries( Ni-Cd ) do not need to be charged and stored when they are not used for a long time. When we are ready to save, we need to discharge the battery to the termination voltage (the camera battery warning light flashes) before it can be packaged and stored in the original packaging carton. It can also be packed in cloth or paper and stored in a dry and ventilated place.